Capital Equipment


ANCILLARY

Lowbake is the leading manufacturer of spray booths and baking ovens in Australia, using the latest technology and services available. This means our customers can have the confidence that their new purchase follows all standards as set by government regulatory authorities, and follow all occupational health and safety guidelines.

All products are designed using CAD (Computer Aided Design) software to any specifications that our customers require, allowing us to produce accurate and efficient layouts and designs for our customers. This leads to efficient installations, and any modifications, large or small, can be made immediately with little ease. This leads to minimal downtime during the installation phase and reduces disruptions to your business, reducing costs. On top of this, Lowbake has many distributors across Australia and the Pacific, including Asia, which means we provide full servicing and installation of all products nationwide.

Lowbake Washbay

The Lowbake Washbay is available in 2 options, above ground and on floor. The above ground option consists of 3 walls, galvanised base, galvanised floor grates, angled floor trays and a center sump.

Once discharged from the pressure washer lance, water is distributed along the floor trays and into a sump located at the centre of the washbay. Water is then distributed into an external polypit ready to be recycled through the Vertical Gravity Separator.

The Lowbake Washbay includes a control box with timer ensuring durability and safety of the equipment. It also includes a lance and boom arm for easy manoeuvrability around the vehicle.

The Lowbake Washbay is the most durable and cost effective solution for all you detailing needs!

Features

  • On-floor & above-ground options
  • Chemical storage box
  • Basin box
  • Vertical gravity separator
  • Pressure washer, lance & boom arm
  • Optional angled LED lighting
  • Control box with timer

Pressure Washer

The Lowbake Dirt Buster uses Italian Built 100 Bar/1450psi Annovi Reverberi Pump - Triple Ceramic Piston Plunger Pump. This guarantees that you are purchasing an extremely High Quality Pump that is built to last.

The unit is also equiped with a 3 Hp, single phase motor and an automatic stop/start protection shut down system. Making this industrial water blaster Ideal for automotive & agricultural applications.

Features

  • Annovi Reverberi Pump
  • 1450 RPM & 12 L/Min
  • 1450psi Triple Ceramic Pistons / Plungers
  • Solid Brass Pump Head
  • Solid Steel 28mm Diameter Direct Drive Shaft & Bearings
  • Air Cooled Aluminium Allow Housing, Assembled With Stainless Steel & Solid Brass Bolts
  • Designed with 2.2Kw / 240v Electric Motors
  • 3/8" Outlet & 1/2" Inlet to Pump Manifold
  • Liquid Filled Stainless Steel Gauge
  • Automatic Stop / Start with a Protection Shut -Down System
  • 12 Month Warranty

Pressure Washer Lance

  • 345 Bar – 5000PSI Rated – 150o C - 300 o F - 40 L/PM
  • This Industrial Grade High Pressure Gun features
  • Heavy Duty, Brass & Stainless Steel Construction in a Solid PVC Casing
  • Swivel Connection to Hose - No more twisting hose!

Download Brochure

Vertical Gravity Separator

The VGS operates by ingenious control of both fluid velocity and pressure.

These forces gently coax non emulsified impurities from water by allowing high density contaminants to fall into a sludge retaining area at the bottom of the vessel, and oil droplets and low density suspended solids to rise to the top of the vessel. The oil and suspended solids then drain off into a waste tank for disposal.

Features

  • Easy to clean
  • Easy to maintain
  • Low flammability
  • Range of flow rates
  • Minimises floor space
  • Highest grade materials
  • Drain waste into container
  • Light weight and easy to move
  • Low cost modular design
  • Meets authority requirements
  • Efficient removal of suspended solids
  • No removal of plates simply back flush
  • Able to handle high concentrations of oils

RADS

Lowbake RADS-Intelligent curing of waterborne coatings.

Lowbake’s Rapid Air Drying System (RADS) can be retrofitted into an existing oven or as part of an OEM Solution, fully integrated with the control system ensuring there are no issues with warranty or compliance standards.

Radio controlled with full zone management. You decide which RADS you need on to eliminate wasted energy with targeted drying.

Controlled air is drawn from inside the oven after being filtered (not from the inlet plenum), and discharged through the 8 adjustable nozzles, per corner, under high pressure to create the jets of air required to aid curing of the water borne coating.

No requirement to use high volumes of compressed air. Australian made, supported nationally and in full compliance with Australian Regulations.

  • Low Cost
  • Fast Installation
  • Simple and Smart
  • Low Maintenance

Download Brochure

Roof Filters

For surface treatment applications, the PA/560 G-10 filter mats are acknowledged as standard equipment. The main field of application for these fine filters is final intake air filtration in paint spray systems and booths. The mats are made of high performance nonwovens produced in-house from elastic, break-resistant polyester fibers. These nonwovens are thermally bonded and specially smoothed on the clean air side, ensuring excellent fiber bonding.

Floor Filters

Paint Pockets Green is your best value for production spraybooths. Paint Pockets are specially engineered to filter both liquid and powder coating over spray generated in industrial and automotive applications. This filter is specifically designed and priced to replace expanded paper, fiberglass and other lower efficient, lower cost filters. By switching your filtration media to Paint Pockets Green you reap the rewards of the Paint Pockets Green triple bonus.

We Recommend

It is very important that you only fit the recommended filters to your Lowbake booth. Fitting filters other than those specified may cause the booth to become unsafe and may affect performance and cleanliness. The specified filters below have been selected for their superior dust holding ability and long life. It is essential for the sake of quality and safety that you do not compromise on these filters in order to keep your booth functioning correctly.

Download Brochure

Get in touch with Global Autocoat

© 2020 Global Autocoat - All Rights Reserved